Random Posts Towards 300,000 Thread!
Moderators: Orlion, balon!, aliantha
-
Alynna Lis Eachann
- Lord
- Posts: 3060
- Joined: Wed Mar 20, 2002 8:23 pm
- Location: Maryland, my Maryland
297,018 and counting
"We probably could have saved ourselves, but we were too damned lazy to try very hard... and too damn cheap." - Kurt Vonnegut
"Now if you remember all great paintings have an element of tragedy to them. Uh, for instance if you remember from last week, the unicorn was stuck on the aircraft carrier and couldn't get off. That was very sad. " - Kids in the Hall
"Now if you remember all great paintings have an element of tragedy to them. Uh, for instance if you remember from last week, the unicorn was stuck on the aircraft carrier and couldn't get off. That was very sad. " - Kids in the Hall
*Chanting: Yes we can... yes we can... yes we can...*
Not far now to 300,000 folks.
Not far now to 300,000 folks.
Have you hugged your arghule today?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
-
sgt.null
- Jack of Odd Trades, Master of Fun
- Posts: 47251
- Joined: Tue Jul 19, 2005 7:53 am
- Location: Brazoria, Texas
- Has thanked: 1 time
- Been thanked: 6 times
This is a beef goulash recipe along with a recipe for spaetzle.
INGREDIENTS:
3 pounds boneless lean beef chuck, cut in 1-inch cubes
3 tablespoons butter
3 medium onions, thinly sliced
2 teaspoons salt
1/8 teaspoon pepper
1 tablespoon paprika
1 cup water
PREPARATION:Heat butter in a Dutch oven or stock pot over medium-low heat. Add onion and cook for 2 minutes. Season beef with salt and pepper and paprika; add to the onions and cook for 20 minutes. Add water. Cover and cook over low heat for 1 1/2 hours, or until beef is tender. Check occasionally and add more water if necessary.
Spaetzle
3 cups sifted flour
1 teaspoon salt
dash nutmeg
dash paprika
4 eggs
3/4 cup water
3 tablespoons butter, melted
Sift dry ingredients together into mixing bowl. Add eggs and water; beat with spoon until smooth. Dampen end of a cutting board and put on about 1/3 of the dough. Smooth a small amount of dough to be thin with spatula. Cut off small strips of the dough into a pot of boiling salted water. (Dip spatula in water several times through cutting spaetzle.) If dough is too thin to hold together, add some flour. Lift spaetzle out, place in a serving dish, and pour some of the melted butter over them. Repeat with remaining dough.
Serve hot with goulash.
INGREDIENTS:
3 pounds boneless lean beef chuck, cut in 1-inch cubes
3 tablespoons butter
3 medium onions, thinly sliced
2 teaspoons salt
1/8 teaspoon pepper
1 tablespoon paprika
1 cup water
PREPARATION:Heat butter in a Dutch oven or stock pot over medium-low heat. Add onion and cook for 2 minutes. Season beef with salt and pepper and paprika; add to the onions and cook for 20 minutes. Add water. Cover and cook over low heat for 1 1/2 hours, or until beef is tender. Check occasionally and add more water if necessary.
Spaetzle
3 cups sifted flour
1 teaspoon salt
dash nutmeg
dash paprika
4 eggs
3/4 cup water
3 tablespoons butter, melted
Sift dry ingredients together into mixing bowl. Add eggs and water; beat with spoon until smooth. Dampen end of a cutting board and put on about 1/3 of the dough. Smooth a small amount of dough to be thin with spatula. Cut off small strips of the dough into a pot of boiling salted water. (Dip spatula in water several times through cutting spaetzle.) If dough is too thin to hold together, add some flour. Lift spaetzle out, place in a serving dish, and pour some of the melted butter over them. Repeat with remaining dough.
Serve hot with goulash.
Lenin, Marx
Marx, Lennon
Good Dog...
Marx, Lennon
Good Dog...
-
Sunbaneglasses
- The Gap Into Spam
- Posts: 2460
- Joined: Mon Dec 13, 2004 5:39 am
- Location: Jasper Alabama
-
Sunbaneglasses
- The Gap Into Spam
- Posts: 2460
- Joined: Mon Dec 13, 2004 5:39 am
- Location: Jasper Alabama
Are we there yet?...
are we there yet?...
are we there yet?
I have to go pee!
(Sounds like the kid's travelling phrase.)
are we there yet?...
are we there yet?
I have to go pee!
(Sounds like the kid's travelling phrase.)
Have you hugged your arghule today?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
-
Sunbaneglasses
- The Gap Into Spam
- Posts: 2460
- Joined: Mon Dec 13, 2004 5:39 am
- Location: Jasper Alabama
A Giant Raver with the Illearth stone is slayed!
Have you hugged your arghule today?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
-
aliantha
- blueberries on steroids
- Posts: 17865
- Joined: Tue Mar 05, 2002 7:50 pm
- Location: NOT opening up a restaurant in Santa Fe
I'm still recovering from that picture of "the Hoff" a couple of pages back...
EZ Board Survivor
"Dreaming isn't good for you unless you do the things it tells you to." -- Three Dog Night (via the GI)
https://www.hearth-myth.com/
-
High Lord Tolkien
- Excommunicated Member of THOOLAH
- Posts: 7385
- Joined: Tue Oct 19, 2004 2:40 am
- Location: Cape Cod, Mass
- Been thanked: 3 times
- Contact:
aliantha wrote:I'm still recovering from that picture of "the Hoff" a couple of pages back...
https://thoolah.blogspot.com/
[Defeated by a gizmo from Batman's utility belt]
Joker: I swear by all that's funny never to be taken in by that unconstitutional device again!
[Defeated by a gizmo from Batman's utility belt]
Joker: I swear by all that's funny never to be taken in by that unconstitutional device again!
Sick... absolutely sick.
but funny
but funny
Have you hugged your arghule today?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
________________________________________
"For millions of years
mankind lived just like the animals.
Then something happened
that unleashed the power of our imagination -
we learned to talk."
________________________________________
If PRO and CON are opposites,
then the opposite of PROgress must be...
_______________________________________
It's 4:19...
gotta minute?
-
aliantha
- blueberries on steroids
- Posts: 17865
- Joined: Tue Mar 05, 2002 7:50 pm
- Location: NOT opening up a restaurant in Santa Fe
Yup, that's the one. 
EZ Board Survivor
"Dreaming isn't good for you unless you do the things it tells you to." -- Three Dog Night (via the GI)
https://www.hearth-myth.com/
oh cripes...i thought we'd DONE with THAT!! arg. 
you're more advanced than a cockroach,
have you ever tried explaining yourself
to one of them?
~ alan bates, the mothman prophecies
i've had this with actors before, on the set,
where they get upset about the [size of my]
trailer, and i'm always like...take my trailer,
cause... i'm from Kentucky
and that's not what we brag about.
~ george clooney, inside the actor's studio
a straight edge for legends at
the fold - searching for our
lost cities of gold. burnt tar,
gravel pits. sixteen gears switch.
Haphazard Lucy strolls by.
~ dennis r wood ~
have you ever tried explaining yourself
to one of them?
~ alan bates, the mothman prophecies
i've had this with actors before, on the set,
where they get upset about the [size of my]
trailer, and i'm always like...take my trailer,
cause... i'm from Kentucky
and that's not what we brag about.
~ george clooney, inside the actor's studio
a straight edge for legends at
the fold - searching for our
lost cities of gold. burnt tar,
gravel pits. sixteen gears switch.
Haphazard Lucy strolls by.
~ dennis r wood ~
-
sgt.null
- Jack of Odd Trades, Master of Fun
- Posts: 47251
- Joined: Tue Jul 19, 2005 7:53 am
- Location: Brazoria, Texas
- Has thanked: 1 time
- Been thanked: 6 times
HLHG Hook Lift / Hydraulic Gantry, recommended for multiple height cans
Hydraulic Gantry 36" stroke, 1 3/4" bore, 1 1/4" piston rod (nitrited rod)
3 1/2" x 3 1/2" X 11 gauge tube base section
3" x 3" x 11 gauge movable section
4" x 2" x 3/16" top landing tube
1/2" steel pivot mounts with 3/4" Teflon lined steel spherical bearings
1/2" steel arch guide (Laser cut)
(UHMW) self-lubricating guides
Grade 8 bolts and nuts
Pivot arm tubing (3" x 2" 3/16") for the lower with steel welded ends
(2 1/2" x 1 1/2" x 11 gauge) for the upper with steel welded ends
Powder Coated Parts
Hydraulics operate from trucks hydraulic system by either a spare valve or added valve section
Hydraulic cylinders have a 2" bore, 25" stroke with a 1 1/4" piston rod (nitrited rod)
Gear driven flow divider
.25/3000 psi. hydraulic hose with #4 jic fittings
3 1/2" steel torsion tube assembly with 1" steel 'tracking bar'
Full 100% warranty on parts for two years (excluding cover)
Hydraulic Gantry 36" stroke, 1 3/4" bore, 1 1/4" piston rod (nitrited rod)
3 1/2" x 3 1/2" X 11 gauge tube base section
3" x 3" x 11 gauge movable section
4" x 2" x 3/16" top landing tube
1/2" steel pivot mounts with 3/4" Teflon lined steel spherical bearings
1/2" steel arch guide (Laser cut)
(UHMW) self-lubricating guides
Grade 8 bolts and nuts
Pivot arm tubing (3" x 2" 3/16") for the lower with steel welded ends
(2 1/2" x 1 1/2" x 11 gauge) for the upper with steel welded ends
Powder Coated Parts
Hydraulics operate from trucks hydraulic system by either a spare valve or added valve section
Hydraulic cylinders have a 2" bore, 25" stroke with a 1 1/4" piston rod (nitrited rod)
Gear driven flow divider
.25/3000 psi. hydraulic hose with #4 jic fittings
3 1/2" steel torsion tube assembly with 1" steel 'tracking bar'
Full 100% warranty on parts for two years (excluding cover)
Lenin, Marx
Marx, Lennon
Good Dog...
Marx, Lennon
Good Dog...
