MEGATON dAN wrote:Cromas Tummins wrote:If only it were that simple.

Simple? Sorry, simplicity on that level can only exist wihtin the vast, empty, vacuous spaces of your own head. Still, it's simpler than VCR instructions.

TV/VCR INSTRUCTIONS
Watching TV:
1) Set TV to channel 3 using TV remote.
2) Power VCR, push "VCR" button. You will see "VCR" on the machine's display.
3) Change channels using the VCR remote.
A list of available channels can be found on the "Web Site Starters" section of the LCUSD web page under Marcus Cable and Charter Communications.
Watching Videotape:
1) Set TV to channel 3 using TV remote.
2) Put tape in VCR
3) Press "play"
Watching School Broadcast:
1. Set TV to channel 3 using TV remote
2) Power VCR, push "VCR" button. You will see "VCR" on the machine’s display.
1. Change channels using VCR remote. Select channel 15 or 16.
Watching Your Computer on the TV:
1. Power off TV, VCR, Computer
2. Connect the cable from the TV to the computer.
3. Power computer.
4. Power TV, set to "AUX". This is the channel directly below channel 2. You may use the up and down buttons on the TV remote to access this channel.
You will always control the volume with the TV remote.